HGM1790N generator set controller is suitable for stand-alone automation and monitoring control (also can be used for peeling machines). It can be started and stopped manually or through remote start/stop signals. The HGM1790N controller monitors and protects the operation of the generator set by collecting and analyzing the voltage, current, water temperature, oil pressure and other data of the generator set. The graphic LCD display on the front panel displays fault conditions and provides effective alarm signals for maintenance as early as possible. In addition, the parameter threshold and delay value can be adjusted through the front panel or USB port (communication with PC software).1. Performance and Features-Graphic LCD display (with backlight), LED indicator, touch button operation;-Hard screen acrylic material is used to protect the screen.-The use of silicone panels and buttons increases the ability to adapt to high and low temperatures.-Power supply range DC (8~35)V, compatible with 12V or 24V starting battery;-Generator single-phase voltage, current, frequency, power and load percentage parameter measurement and display:Generator voltage V Generator frequency HzGenerator power kW Generator current ALoad percentage-Accurately measure and display generator power:Oil pressure kPa temperature ºCFuel level% total running time H (up to 199999 hours)Battery voltage V Engine speed RPMAccumulated start times (up to 199999 times, displayed on the PC)-With generator set fault protection and display functions.-Compatible with a variety of temperature, pressure, and oil level sensors, which can be customized and used directly; temperature sensors and pressure sensors can be used in parallel with the annunciator to provide analog quantities and improve the protection level;
