****** - Verified Buyer
4.5
So easy to use. So sturdy. You just plug your cutting in and the work great. Plug your generator or regulator into it and let it go. No calibration necessary to start. According to the manual it will rarely need calibration but the steps are easy as well. Only been using it for a couple months indoors in a 12x17 room. Love itThe Titan controller monitor hovers around 1200-1350 ppm. It almost always shuts off after hitting 1250ppm rather than 1500ppm. Because the ppm levels are built in, I cannot change it. I bought it because I wanted my room to hit 1500ppm. The return window is over and manufacturer isn't responding back.this works amazing , kicks on my CO2 burner on and off just fine , keeps it at 1500ppm , wasn't expecting it to work as well as it odes because I kind of read some mixed reviews , had to order the CO2 burner from another dealer but this works with the Titan ares CO2 burner really well, great and worth the money , even warns you if the CO2 raised too much , cause it will raise above the set limit if a couple people are int the room with it for a long time , you just have to air out the room and let it kick back on and raise the limit again or watch the light to drop to an acceptable limit , this thing is great .A little bit pricey but it is a good unit!Works wonderfully. Although CO2 control is fixed at 1500ppm, there are indications (not control) at other levels. You could use a separate flow meter and this unit as a CO2 monitor for other (approximate) levels which i've tried too. My son blew at it and the indicator showed increased CO2 and the supply was cut off. One way to test it :) . I live in a 230V area so I'm using a voltage transformer. Wish Titan considered other countries voltage supplies too. My solenoid accepts 125-250V though. Overall, a remarkable unit.The Atlas2 controller works great! The controller is very precise. I’m using about 50% less co2 now, and my ppms are ALWAYS at optimum levels. Nicely packaged, the made in Washington State sticker on the box is a nice touch. This controller is made in America, built to US manufacturing tolerances and standards. You can see and feel the quality. Great job!Ever so slightly off as far as ppm goes. It still maintains my garden at 1300 ppm for the high and around 1050 for the low. Ironically I like this better when I have to be in thé grow environment. Besides that it is pretty great. I will never go back to non-co2 grows.Very solid co2 controller. It comes factory calibrated at 1500ppm, and as such is virtually idiot proof. Also has a light sensor so it only loads when the lights are on. If you're using a ducted reflector in a tent, your co2 consumption should be very low. This product must be used in conjunction with a co2 regulator/emitter which attaches to your tank, and then plugs into your Atlas 2. The controller merely tells the regulator when to emit co2. Creates optimal growing levels for most plant species.Worked for all of about a week or two. Now it won’t register the correct co2 reading. I had to find out by cross referencing it with a meter. I recalibrated it multiple times and it still did not fix the issue.super produit ! vais acheter de nouveauworks great ?Great product works exactly as it should keeps my room ppm at optimal performance.No good
